RYCOTE Shotgun Microphone HC-35

English description below

• Use for Sports Broadcast and events
• Use for wide angle cinema shots
• Consistent acoustic timbre with other Rycote mics
• Fine-tuned mechanical RF shielding
• Made of machined aluminum and first-class electronics

The Rycote HC-35 is a hypercardioid, long shotgun microphone, designed for specific applications such as sport broadcast and location recording where wide-angle shots and loud noises’ rejection are vital to clean sound.  The HC-35 produces a highly directional polar thanks to its longer interference tube than its siblings, the HC-15 and HC-22, providing better o-axis rejection. It is also remarkably light compared to other solutions allowing an easier job for targeting sound sources when mounting it on windshields or classic softie slip-on protection. Specifications Frequency Range: 25Hz - 18 kHz  Self Noise: 7.5 dB-A Polar Pattern: Hyper Cardioid Capsule Type: Back Electret Condenser Output Sensitivity: 55.0 mV/Pa (-25.2 dB)  Max. Output Voltage: 4 Vp  Output Impedence: 100 Ω Min. Load Impedance: 1 k Ω Signal / Noise Ratio: 87dB typical (@ 1 kHz/Pa A-weighted) CMRR (@ 1 kHz): > 60 dB Max. Cable Length: 100 m Powering: P-48 Powering Valid Range: 48-24V (Max SPL reduced at 24V) Current Consumption: 3.0 mA Max. SPL:  133 dB SPL (at 1 kHz 1.0%  THD Typical) 127 dB SPL (at 1 kHz 0.5%  THD Typical) RFI Shield: Yes Connector: XLR-3M Weight: 119 g Colour. Matte Black

• Use for Sports Broadcast and events
• Use for wide angle cinema shots
• Consistent acoustic timbre with other Rycote mics
• Fine-tuned mechanical RF shielding
• Made of machined aluminum and first-class electronics

The Rycote HC-35 is a hypercardioid, long shotgun microphone, designed for specific applications such as sport broadcast and location recording where wide-angle shots and loud noises’ rejection are vital to clean sound.  The HC-35 produces a highly directional polar thanks to its longer interference tube than its siblings, the HC-15 and HC-22, providing better o-axis rejection. It is also remarkably light compared to other solutions allowing an easier job for targeting sound sources when mounting it on windshields or classic softie slip-on protection. Specifications Frequency Range: 25Hz - 18 kHz  Self Noise: 7.5 dB-A Polar Pattern: Hyper Cardioid Capsule Type: Back Electret Condenser Output Sensitivity: 55.0 mV/Pa (-25.2 dB)  Max. Output Voltage: 4 Vp  Output Impedence: 100 Ω Min. Load Impedance: 1 k Ω Signal / Noise Ratio: 87dB typical (@ 1 kHz/Pa A-weighted) CMRR (@ 1 kHz): > 60 dB Max. Cable Length: 100 m Powering: P-48 Powering Valid Range: 48-24V (Max SPL reduced at 24V) Current Consumption: 3.0 mA Max. SPL:  133 dB SPL (at 1 kHz 1.0%  THD Typical) 127 dB SPL (at 1 kHz 0.5%  THD Typical) RFI Shield: Yes Connector: XLR-3M Weight: 119 g Colour. Matte Black