English description below
- 3-channel wireless lens control unit
- Control focus, iris, and/or zoom
- Short-, medium-, and long-range transmission options
- 15-channel selection minimizes outside interference
- Powered via two 18650 rechargeable lithium-ion batteries (not included)
The Tilta Nucleus-M Wireless Lens Control System Partial Kit IV contains the essential elements for pulling focus and iris wirelessly. The kit includes the Nucleus-M FIZ hand unit controller, two Nucleus-M motors, two removable lens belts (DSLR Lens Follow Focus Adapters), two motor power cables, two marking disks for the hand unit, a lanyard for the hand unit, and a battery charger unit. The system enables an AC to pull focus and iris on a prime lens. If you are using a lens that does not have standard cine-style gears, then use the included lens belts to add gears to your lens. This partial kit is a dual-axis system, typically controlling focus and iris, but the hand unit will allow you to control an additional motor (not included) for zoom control when using a zoom lens. The system can wirelessly pull focus from up to 1000´ away, and the batteries can power the hand unit for approximately 10 hours on a single charge (batteries not included). The first motor is powered via the included D-Tap to 7-pin cable; the second motor daisy-chains to the fist via the 7-pin to 7-pin cable for power. The lanyard attaches to the hand control unit, allowing you to wear it around your neck. Specifications Operating Frequency 2.4 GHz Maximum Transmission Distance 492 to 984´ / 150 to 300 m Transmission Channels 15 Emission Power 30 to 100 MW Current 0.15 A Voltage 7.2 7.2-14.8 V, external Battery Type 18650 Operating Temperature Range -4 to 122°F / -20 to 50°C Material of Construction Aluminum alloy, stainless steel, ABS plastic Rubber, rosewood Dimensions 5.6 x 3.6 x 2.8" / 142.0 x 90.5 x 70 mm Weight 15 oz / 430 g
- 3-channel wireless lens control unit
- Control focus, iris, and/or zoom
- Short-, medium-, and long-range transmission options
- 15-channel selection minimizes outside interference
- Powered via two 18650 rechargeable lithium-ion batteries (not included)
The Tilta Nucleus-M Wireless Lens Control System Partial Kit IV contains the essential elements for pulling focus and iris wirelessly. The kit includes the Nucleus-M FIZ hand unit controller, two Nucleus-M motors, two removable lens belts (DSLR Lens Follow Focus Adapters), two motor power cables, two marking disks for the hand unit, a lanyard for the hand unit, and a battery charger unit. The system enables an AC to pull focus and iris on a prime lens. If you are using a lens that does not have standard cine-style gears, then use the included lens belts to add gears to your lens. This partial kit is a dual-axis system, typically controlling focus and iris, but the hand unit will allow you to control an additional motor (not included) for zoom control when using a zoom lens. The system can wirelessly pull focus from up to 1000´ away, and the batteries can power the hand unit for approximately 10 hours on a single charge (batteries not included). The first motor is powered via the included D-Tap to 7-pin cable; the second motor daisy-chains to the fist via the 7-pin to 7-pin cable for power. The lanyard attaches to the hand control unit, allowing you to wear it around your neck. Specifications Operating Frequency 2.4 GHz Maximum Transmission Distance 492 to 984´ / 150 to 300 m Transmission Channels 15 Emission Power 30 to 100 MW Current 0.15 A Voltage 7.2 7.2-14.8 V, external Battery Type 18650 Operating Temperature Range -4 to 122°F / -20 to 50°C Material of Construction Aluminum alloy, stainless steel, ABS plastic Rubber, rosewood Dimensions 5.6 x 3.6 x 2.8" / 142.0 x 90.5 x 70 mm Weight 15 oz / 430 g
