Din indkøbskurv
Der er ikke flere varer i din indkøbskurv
TERADEK RT Latitude Power Cabl DTAP (40cm r/a to straight)
TERADEK
60007517
1.686,00 kr.
Inkl. moms
...2 - 7 Hverdages leveringstid
Power Cable, 0B 2p (Crossover) RA For MDR
English description below
Power Cable, 0B 2p (Crossover) RA For MDR Power the MDR from 2pin LM.0B, US type (Pin2=GND). This cable is wired 1-2, 2-1, to allow the MDR (Pin1=GND) to power off USA style 2pin LM power source (Pin2=GND). This will NOT work on an ARRI, RED, etc., which use the "European" standard of Pin1=Gnd To be clear, this is REVERSING the pins, to allow the MDR (Pin#1=GND) to power off a supply where Pin#2=GND. Compatible with:- - Letux Helix 2pin power outputs 40cm cable length. This cable has a right-angled LM.0B connector and colour coded overmold allowing for an easy compact setup.
Power Cable, 0B 2p (Crossover) RA For MDR Power the MDR from 2pin LM.0B, US type (Pin2=GND). This cable is wired 1-2, 2-1, to allow the MDR (Pin1=GND) to power off USA style 2pin LM power source (Pin2=GND). This will NOT work on an ARRI, RED, etc., which use the "European" standard of Pin1=Gnd To be clear, this is REVERSING the pins, to allow the MDR (Pin#1=GND) to power off a supply where Pin#2=GND. Compatible with:- - Letux Helix 2pin power outputs 40cm cable length. This cable has a right-angled LM.0B connector and colour coded overmold allowing for an easy compact setup.
Power Cable, 0B 2p (Crossover) RA For MDR Power the MDR from 2pin LM.0B, US type (Pin2=GND). This cable is wired 1-2, 2-1, to allow the MDR (Pin1=GND) to power off USA style 2pin LM power source (Pin2=GND). This will NOT work on an ARRI, RED, etc., which use the "European" standard of Pin1=Gnd To be clear, this is REVERSING the pins, to allow the MDR (Pin#1=GND) to power off a supply where Pin#2=GND. Compatible with:- - Letux Helix 2pin power outputs 40cm cable length. This cable has a right-angled LM.0B connector and colour coded overmold allowing for an easy compact setup.
Power Cable, 0B 2p (Crossover) RA For MDR Power the MDR from 2pin LM.0B, US type (Pin2=GND). This cable is wired 1-2, 2-1, to allow the MDR (Pin1=GND) to power off USA style 2pin LM power source (Pin2=GND). This will NOT work on an ARRI, RED, etc., which use the "European" standard of Pin1=Gnd To be clear, this is REVERSING the pins, to allow the MDR (Pin#1=GND) to power off a supply where Pin#2=GND. Compatible with:- - Letux Helix 2pin power outputs 40cm cable length. This cable has a right-angled LM.0B connector and colour coded overmold allowing for an easy compact setup.
No reviews
Tap to zoom
