BRESSER Quadro Individuo S Thermo-Hygrometer

The BRESSER Quadro Individuo S Thermo-Hygrometer gives you complete control over your home's climate. This clever device displays readings from 4 different locations on one screen, so you can monitor conditions throughout your house at a glance. Beyond basic temperature and humidity monitoring, it comes packed with handy extras like an alarm clock and memory storage for peak readings.
_x000D_
_x000D_ Complete Home Climate Monitoring Made Simple
_x000D_
_x000D_ The day begins in the cosily heated living room, the laptop awaits in the cooler study, and in the evening you wind down in the perfectly balanced bedroom - this system has you covered. The built-in temperature and humidity meters in the base unit work alongside 3 wireless sensors to give you a complete picture of your home's climate. You can label each sensor with custom room names, so you'll instantly know if the nursery's getting chilly or rather the basement's bang on target.
_x000D_
_x000D_ Clever Features That Make a Difference
_x000D_
_x000D_ Winter heating drying out your home? Bathroom getting a bit too steamy? The memory function tracks maximum and minimum readings, helping you spot overly dry air or potential damp issues in time. Start your mornings right with the built-in alarm and snooze function. Even better, you'll never need to adjust the time manually – it automatically stays accurate via radio signal.
_x000D_
_x000D_ Wireless Sensors That Go the Distance
_x000D_
_x000D_ Got a workshop in the garage or a spare room in the loft? These wireless sensors work from up to 80 metres away, bringing readings from every corner of your home straight to your bedside table. They're built tough too – IP44 water-resistant rating means they'll happily sit in steamy bathrooms, busy kitchens, or even outside in the garden. Each sensor has its own display as well, so you can check readings on the spot.
_x000D_
_x000D_ Take control of your home's comfort with the BRESSER Quadro Individuo S Thermo-Hygrometer.
_x000D_
_x000D_
_x000D_
_x000D_ FEATURES BASE STATION
_x000D_
_x000D_

_x000D_
• Built-in thermometer and hygrometer for local readings
_x000D_
• Displays data from all 3 wireless sensors
_x000D_
• Custom room naming for each sensor channel
_x000D_
• Temperature readings with trend arrows (°C/°F switchable)
_x000D_
• Humidity readings with trend indicators (%)
_x000D_
• Records and stores maximum/minimum values
_x000D_
• DCF Radio-controlled time display (12/24-hour format, weekdays in 7 languages)***
_x000D_
• Alarm clock with snooze function
_x000D_
• Runs on 2x AAA 1.5V batteries (included)
_x000D_
• Battery level indicators for base unit and all sensors
_x000D_

_x000D_ ***PLEASE NOTE: This device receives the DCF time signal (Central European Time). However, you can easily adjust the time display to different time zones using the offset function. 
_x000D_
_x000D_
_x000D_
_x000D_ FEATURES SENSOR
_x000D_
_x000D_

_x000D_
• Set of 3 thermo-hygro sensors included
_x000D_
• Measures temperature and humidity (indoor/outdoor use)
_x000D_
• Individual display on each sensor for local readings
_x000D_
• Transmission range: up to 80 metres
_x000D_
• Water-resistant rating: IP44 (splash-proof)
_x000D_
• Dimensions: 71 x 65 x 23 mm / Weight: 44g
_x000D_
• Each sensor runs on 2x AAA 1.5V batteries (included)
_x000D_

_x000D_
_x000D_
_x000D_ SCOPE OF DELIVERY
_x000D_
_x000D_

_x000D_
• Base station unit
_x000D_
• 3x wireless thermo-hygro sensors
_x000D_
• 8x AAA/LR03 1.5V batteries
_x000D_
• Instruction manual
_x000D_

_x000D_ _x000D_